Motors
Includes gauges, shafts, caps, valves, and screws.
Product Name: Reset Shaft
Application: Production Revolution Counter.
Description: A small axle designed with a knurl at one end to force fit a small gear. The other end has a 1-56 UNS thread for the attachment of a small knob or button.
Dimensions: 1.371 inches in length with a 0.068 inch diameter.
Material: 12L14 CDS (Cold drawn Steel).
Tolerances: ± 0.005 inch with critical dimensions held to 0.0005 inch.
Finishes: 32 RMS or better.
Fabrication: Single spindle Swiss screw machine.
Special Features: No burrs allowed anywhere.
Product Name: Bearing Cap
Application: Production Revolution Counter.
Description: A small brass part designed as a bearing surface for a small shaft.
Dimensions: 0.106 inch length by 0.2505 inch diameter.
Material: Brass alloy 360.
Tolerances: ± 0.005 inch with more critical dimensions held to ± 0.001.
Finishes: No burrs allowed anywhere.
Fabrication: Swiss screw machine.
Special Features: No burrs allowed anywhere.
Product Name: Hour Tube
Application: Sleeve for revolution counter shaft.
Description: A small brass calendrical part designed to mechanically measure a given increment of time.
Dimensions: 0.681 inch length with a 0.314 inch diameter stepped to a 0.165 inch diameter.
Material: Brass Alloy 360 half hard
Tolerances: ± .005 inch with some dimensions held to 0.0005 inch
Finishes: Internal bore and external cylindrical surfaces must be 50 RMS or better for lubrication applied in assembly.
Fabrication: Swiss CNC.
Special Features: No burrs allowed anywhere.
Product Name: Spring Guide
Application: Revolution Counter.
Description: A small non-metallic part designed to hold and guide a spring during operation.
Dimensions: 0.487 inche in length with a 0.155 inch diameter.
Material: White Delrin.
Tolerances: ± 0.005 inch with some dimensions held to ± 0.002 inch
Finishes: Standard machine finish of 32 RMS or better.
Fabrication: Single spindle Swiss screw machine
Special Features: All sharp edges chamfered.
